To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Remote-controlled, retractable tonneau cover opens and closes in under 30 seconds. Cover locks at any point along rails, and it fits over most fifth-wheel hitches. Powder coated aluminum panels with silicon hinges provide superior water resistance.
Features:
Specs:
The Bedlocker retractable tonneau cover protects your cargo and truck bed from the elements. This electric cover opens and closes easily with a key fob remote, and it can stop and lock anywhere along the bed to provide custom protection for your cargo. Heavy-duty aluminum panels with weather-resistant silicon hinges keep water and debris out of your truck bed, and they help to protect your cargo from theft. The low-profile cover also installs easily without drilling.
This electric, retractable tonneau cover is powered by a motor that wires directly to your vehicle's battery. The included key fob remote activates the motor and allows you to open or close the cover in under 30 seconds. An electro-magnetic brake stops and locks the cover at any point along the rails for customized cargo protection. Press the Open button on the remote to retract the cover into the canister. Simply release the button to trigger the electro-magnetic brake and lock the cover in at the desired position. Press the Closed button to deploy the cover. There is an optional manual switch available (sold separately) that allows you to operate the cover from the cab of your truck or at the tailgate.
A manual release is located on the canister in case of remote control or power failure. Simply pull out the manual release lever, and engage the kickstand behind it. This allows you to deploy and retract the cover by hand until power is restored to your vehicle.
The cover retracts into a compact, angled canister located at the front of your truck bed. This canister protects the retracted cover from the elements, and with the cover stored in the canister you'll have unrestricted visibility out of your rear window. The angled design of the canister also allows for maximum clearance for your tools and cargo so there is no need to remove the cover to haul cargo.
Water Management System
The Bedlocker rails feature a water management system that channels excess water into the canister. This prevents water from getting into your bed or freezing in your tonneau cover rails during cold temperatures. Drain tubes attached to the bottom of the canister remove water through the OE drain holes in the floor of your truck bed.
Flush-Mount Design
The Bedlocker side rails mount level with your truck bed rails for a flush appearance. This flush-mount design is aerodynamic to reduce wind drag, and it helps to improve gas mileage when cover is closed. Even with the flush-mount design, the cover fits over most fifth-wheel trailer hitches. Note: The highest point of the fifth-wheel hitch must be at least 2" below the bed rails.
The cover is constructed of interlocking aluminum panels with a matte black powder coat finish. A silicon weather hinge creates a tight seal between each panel to prevent water and dirt from entering the truck bed. A barrier seal at the tailgate prevents water from entering truck bed through the rear. The rails are constructed of extruded aluminum with a black powder coat finish.
Security
The Bedlocker provides excellent protection for your cargo when used in conjunction with a closed and locked tailgate. The durable aluminum panels are better at preventing theft when compared with soft covers that can be cut or punctured with a knife. The panels are also more effective at preventing theft than tri-fold hard tonneau cover because the panels cannot be pried open at any point along the rails.
No-Drill Installation
To install the cover, place the canister on a support at the bulkhead of the truck. Run the wiring harness from the canister to your vehicle's battery. Do not connect the harness to your battery until the rest of the installation is complete.
Attach the rails to the canister, then secure the rails to your truck bed side rails using 2 clamps per side. Slide the clamp onto the rail, flip the pivot arm up so it is under the bed rail lip, and tighten the clamp in place. Shims are included for trucks with tapered beds.
Each clamp at the tailgate end of the rails has a supplemental kickstand to help level the rails and prevent overtightening during installation. To install the kickstand, simply slide it into the grip handle at the bottom of the clamp. Rotate the kickstand so the foot rests squarely against the side wall of the truck bed, and tighten in place. Once the kickstands are installed, attach the drain tubes to the canister and route each tube out of the OEM drain holes in the floor of your bed. Complete the installation by mounting the top cover plate over the canister and connecting the wiring harness to the battery.
California residents: click here
Average Customer Rating: 4.6 out of 5 stars (13 Customer Reviews)
Remote-controlled, retractable tonneau cover opens and closes in under 30 seconds. Cover locks at any point along rails, and it fits over most fifth-wheel hitches. Powder coated aluminum panels with silicon hinges provide superior water resistance.Excellent, as always!
I was looking for the very best for my 2022 Chevy Silverado 3500HD High Country and when you want the best, you get Pace Edwards. I've owned other brands before on other trucks such as Roll-n-Lock and ReTrax and both are great products, but for this truck, I wanted nothing but the best. With the track record and quality that comes with Pace Edwards, this is why they are the top of the line. I installed this cover completely by myself, a helper would have been nice to have, I was able to get it done with no issues.
The cover fits perfectly and looks like it was supposed to be there. etrailer's customer support is always top notch and the representative I spoke with on the phone made it so easy to order, she was very friendly and helpful. Everything came well packaged and undamaged. The 2 included remotes are nice, but I also ordered to sets of the accessory wired switch kit. I wired them together, sending 1 switch up front, inside the cab. The other to the back corner of the bed wired up to a weatherproof switch. I spent more time on the wiring than I did installing the cover.
The only thing that kinda bugs me (and this is 100% personal preference NOT an issue with the product) is the tailgate seal at the edge of the cover, the shape and design of the seal is such that it's a double wall flap with a hollow center. Now they may have intended it to sit on top of the edge of the tailgate, but I prefer how it looks butted up against the tailgate like a door seal, which makes a U shape. However I have to keep pushing it down to keep it flat across the back. I may end up sliding a small round piece of weatherproof foam inside, all the way across to create more of an bicycle tire affect, the foam keeps the seal "inflated" while pressure holds it tight when closed up. But that's just me.
Overall, VERY pleased with the products and service. The cover and wiring harness are both high quality, comparable to GM factory. I highly recommend this, well worth the money.
great product. exactly what i expected and easier than imagined to install.
looks and works great!!! easy install fit my 2024 gmc sierra 3500hd denali perfectly
I love this tonneau. I would reccomed going with this model, but getting the tracks that support their racks. It was Covid time and stock was short. I was lucky to get this one. I would go with 4.5. I think they should have put a more powerful motor. Sometimes it doesn't have the power to open all the way. On another note etrailer was awesome. The rails were bent when the shipment came, they took rails out of there last one in stock and sent them so I could get it installed before my cross country trip.
My last truck had the Pace Edwards Bedlocker, so when I got a newer truck I had to get another Bedlocker. Great security. Electric opening without a key. To someone wanting to break into the bed there’s no apparent way to open it.
Great tonneau cover. One year later and still functions like new.
The remote doesn’t always work. Sometimes you have to jar or push in the cover to get it to engage.
Real good all in all. Does rub in the holding box whenever it’s all the way rolled in. Minor, but rubs.
Great product, easy install no more removing tools every night!
After getting all of the parts I can put it in now
Do you have a question about this Tonneau Cover?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.